AD2096 alarm interface unit
Product Classification：AD matrix series
Functional overview：
AD alarm host
Alarm interface equipment makes the system respond to the alarm.
For AD matrix switch / control system
AD2096 has 64 contact circuit, the alarm input into the alarm signal coding for the AD matrix switch / controller use. After the matrix switch / controller is programmed, the alarm camera can be automatically switched on to a predetermined monitor, and the command and the auxiliary function of the call are activated to respond to the alarm contacts.
Any one of the alarm contacts is activated when the trigger is triggered by a C type relay for use by other external devices. The D1P switch is used to select the contact number (64 A), normally closed or open contacts (8 for each group), adjust the interface baud rate. Multiple devices can be cascaded through the RS-232 line, increasing alarm input capacity.
This alarm interface device can be used with AD2l50 series, ADl68, AD1024 series matrix switch / controller. This equipment can be installed in the cabinet as well as before and after the general, wall and desktop installation type.
Technical parameter:
- input:
64 alarm contacts (short circuit ground or 0~5V logic level), screw terminal connector
- output:
RS-232, the baud rate is optional.
- voltage:
120V/60Hz (model followed by X, said 230V/50Hz)
- power:
8W (nominal)
- installation:
Can be installed on the rack (universal rack) or on the desktop.
- size:
89 (high) 432 * (W) * 203 (long) mm
- weight:
3.1Kg